English
Office Phone: (+30) 2810 391981
Email: esmaeel(AT)iesl.forth.gr
Dr. Moghimi Esmaeel
Scholar ID
Office Phone: (+30) 2810 391381
Lab Phone: (+30) 2810 392108
Fax: G021
Email: melvas@iesl.forth.gr
Dr. Melissinaki Vasileia

Dr. Vasileia Melissinaki received her PhD degree from the department of Physics of University of Crete. She received her Master degree (2011) and her Bachelor (2009) from the same department. In her PhD thesis she worked on the fabrication and studying of 3D micro-optical elements on the end face of optical fibers and their use as gas and liquid sensors.

 

Education

  • 2017, Ph.D. in Physics, Department of Physics, University of Crete, Greece
  • 2011, M.Sc. in Microelectronics and Optoelectronics, Department of Physics, University of Crete, Greece
  • 2009, B.S. in Physics, Department of Physics, University of Crete, Greece.

Interests

  • Direct laser writing via polymerization
  • Mechanical metamaterials
  • Endface fiber sensors
  • 3D scaffolds for tissue engineering
  • 3D micro-implants for medical applications
Advances in Pantographic Structures: Design, Manufacturing, Models, Experiments and Image Analyses
F. dell’Isola, P. Seppecher, M. Spagnuolo, E. Barchiesi, F. Hild, T. Lekszycki, I. Giorgio, L. Placidi, U. Andreaus, M. Cuomo, S. R. Eugster, A. Pfaff, K. Hoschke, R. Langkemper, E. Turco, R. Sarikaya, A. Misra, M. De Angelo, F. D’Annibale, A. Bouterf, X. Pinelli, A. Misra, B. Desmorat, M. Pawlikowski, C. Dupuy, D. Scerrato, P. Peyre, M. Laudato, L. Manzari, P. Göransson, C. Hesch, S. Hesch, P. Franciosi, J. Dirrenberger, F. Maurin, Z. Vangelatos, C. Grigoropoulos, V. Melissinaki, M. Farsari, W. Muller, B. E. Abali, C. Liebold, G. Ganzosch, P. Harrison, R. Drobnicki, L. Igumnov, F. Alzahrani, T. Hayat
Continuum Mechanics and Thermodynamics, Volume:31, Issue:4, Page:1231–1282 , Year:2019, DOI:https://doi.org/10.1007/s00161-019-00806-x
Force–displacement relationship in micro-metric pantographs: Experiments and numerical simulations
F. dell’ Isola, E. Turco, A. Misra, Z. Vangelatos, C. Grigoropoulos, V. Melissinaki, M. Farsari, C. R. Mecanique
Comptes Rendus Mécanique, Volume:347, Issue:5, Page:397-405, Year:2019, DOI:https://doi.org/10.1016/j.crme.2019.03.015
3D laser nano-printing on fiber paves the way for super-focusing of multimode laser radiation
G. S. Sokolovskii, V. Melissinaki, K. A. Fedorova, V. V. Dudelev, S. N. Losev, W. Sibbett, M. Farsari
Scientific Reports, Volume:8, Page:1-9, Year:2018, DOI:doi.org/10.1038/s41598-018-32970-6
A fiber optic Fabry-Perot cavity sensor for the probing of oily samples
V. Melissinaki, M. Farsari, S. Pissadakis,
MDPI Fibers, Volume:5, Page:1, Year:2017, DOI:doi.org/10.3390/fib5010001
Fiber Endface Fabry–Perot Microsensor With Distinct Response to Vapors of Different Chlorinated Organic Solvents
V. Melissinaki, I. Konidakis, M. Farsari and S. Pissadakis
IEEE Sensors Journal, Volume:16, Issue:19, Page:7094 – 7100, Year:2016, DOI:doi.org/10.1109/JSEN.2016.2596139
A fiber-endface, Fabry-Perot vapor microsensor fabricated by multiphoton polymerization
V. Melissinaki, M. Farsari and S. Pissadakis
IEEE Journal of Selected Topics in Quantum Electronics, Volume:21, Issue:4, Page:5600110, Year:2015, DOI:doi.org/10.1109/JSTQE.2014.2381463
Design, Fabrication and Computational Characterization of a 3D Micro-Valve Built by Multi-Photon Polymerization
S. Galanopoulos, N. Chatzidai, V. Melissinaki, A. Selimis, C. Schizas, M. Farsari and D. Karalekas
Micromachines, Volume:5, Page:505-514, Year:2014, DOI:doi.org/10.3390/mi5030505
Improvement of the Fabrication Accuracy of Fiber Tip Microoptical Components via Mode Field Expansion
A. Žukauskas, V. Melissinaki, D. Kaskelyte, M. Farsari and M. Malinauskas
Journal of Laser Micro/Nanoengineering, Volume:9, Page:68-72, Year:2014, DOI:doi.org/10.2961/jlmn.2014.01.0014
Direct laser writing of 3D scaffolds for neural tissue engineering
V. Melissinaki, A. A. Gill, I. Ortega, M. Vamvakaki, A. Ranella, J. W. Haycock, C. Fotakis, M. Farsari and F. Claeyssens
Biofabrication, Volume:3, Page:045005, Year:2011, DOI:doi.org/10.1088/1758-5082/3/4/045005
Tailor-made three-dimensional hybrid scaffolds for cell cultures
S. Psycharakis, A. Tosca, V. Melissinaki, A. Giakoumaki and A. Ranella
Biomedical Materials, Volume:6, Page:045008, Year:2011, DOI:doi.org/10.1088/1748-6041/6/4/045008
On the design and fabrication by two-photon polymerization of a readily assembled micro-valve
C. Schizas, V. Melissinaki, A. Gaidukeviciute, C. Reinhardt, C. Ohrt, V. Dedoussis, B. N. Chichkov, C. Fotakis, M. Farsari & D. Karalekas
Advanced Manufacturing Technology, Volume:48, Issue:5, Page:435-441, Year:2010, DOI:doi.org/10.1007/s00170-009-2320-4
Office Phone: (+30) 2810 391917
Webpage: mavidis(AT)iesl.forth.gr
Mr. Mavidis Charalampos
Office Phone: (+30) 2810 391545
Email: hector.mas@iesl.forth.gr
Dr. Mas Hector
06/2014 – 07/2019 PhD Student on BEC1
10/2013 – 06/2014 Internship on BEC 1
 

After a postdoc at the Jet Propulsion Laboratory in Pasadena, he is now in the Weld Group at the UC Santa Barbara, California.

06/2014 to 07/2019 PhD Student on BEC 1 

10/2013 to 06/2014 Intern on BEC 1 
09/2012 to 09/2013 MsC in photonics at the Optics Laboratory of the University of Vigo 
Hector did his MSc at the Optics Laboratory of the University of Vigo at Ourense Campus, where he worked on the optimization of the photonic gauge for XHV under the supervision of Ángel Paredes.
 
10/2008 to 10/2012 Undergraduate at the University of Valencia
Hèctor graduated from the University of Valencia in 2012 and he went right after to Galicia to start a MsC in photonics at the Optics Laboratory of the University of Vigo at Ourense Campus. His last incursion in physics was a collaboration in the theoretical development of the Photonic Gauge of XHV.
 
 09/2008 to 09/2012 Undergraduate at the University of Valencia 
 Hèctor did his undergraduate studies at the Physics Faculty of the Universitat de València. There he also had a short internship at Energesis Group.

 

Atomtronic Matter-Wave Lensing
Saurabh Pandey, Hector Mas, Georgios Vasilakis, and Wolf von Klitzing
Phys. Rev. Lett. , Volume:126, Page:170402, Year:2021, DOI:https://doi.org/10.1103/PhysRevLett.126.170402
Hypersonic Bose–Einstein condensates in accelerator rings
Saurabh Pandey, Hector Mas, Giannis Drougakis, Premjith Thekkeppatt, Vasiliki Bolpasi, Georgios Vasilakis, Konstantinos Poulios, and Wolf von Klitzing
Nature, Volume:AOP, Page:205--211, Year:2019, DOI:doi.org/10.1038/s41586-019-1273-5
Matter-wave interferometers using TAAP rings
P. Navez, S. Pandey, H. Mas, K. Poulios, T. Fernholz, and W. von Klitzing
N J Phys, Volume:18, Page:075014, Year:2016, DOI:dx.doi.org/10.1088/1367-2630/18/7/075014
Microwave spectroscopy of radio-frequency-dressed Rb87
G. A. Sinuco-Leon, B. M. Garraway, H. Mas, S. Pandey, G. Vasilakis, V. Bolpasi, W. von Klitzing, B. Foxon, S. Jammi, K. Poulios, and et al.
Phys. Rev. A, Volume:100, Page:053416-2, Year:2019, DOI:dx.doi.org/10.1103/PhysRevA.100.053416
Precise and robust optical beam steering for space optical instrumentation
G. Drougakis, K. G. Mavrakis, S. Pandey, G. Vasilakis, K. Poulios, D. G. Papazoglou, and W. von Klitzing
CEAS Space Journal, Volume:-, Page:1-9, Year:2019, DOI:dx.doi.org/10.1007/s12567-019-00271-x
Antireflection coated semiconductor laser amplifier for Bose-Einstein condensation experiments
S. Pandey, H. Mas, G. Drougakis, K. G. Mavrakis, M. Mylonakis, G. Vasilakis, V. Bolpasi, and W. von Klitzing
AIP Adv. 8, Volume:8, Page:095020, Year:2018, DOI:doi.org/10.1063/1.5047839
Email: kmarm(AT)iesl.forth.gr
Mr. Marmatakis Konstantinos
Office Phone: (+30) 2810 391291
Fax: G091
Email: marymanou@iesl.forth.gr
Dr. Manousidaki Mary
Office Phone: (+30) 2810 394129
Email: diml@physics.uoc.gr
Full CV: Download
Publications PDF: Download
Dr. Louloudakis Dimitris

Dr Dimitrios Louloudakis earned his PhD in 2016 at University of Crete. His PhD thesis is focused on thermochromic and electrochromic coatings for smart windows applications. After his PhD, he worked as postdoctoral researcher at Technological Educational Institute of Crete on Smart electrochromic windows for energy saving applications and after that he joined the research group of Prof. Chennupati Jagadish at the Australian National University to work on the synthesis and characterization of Gallium oxide thin films using a PLD system. In 2018 he joined the research group of Prof. Pisith Singjai at Chiang Mai University to work on the synthesis and characterization of tungsten oxide thin film using a spark method deposition. Currently he is working as postdoctoral researcher at the Microelectronics research group focusing on growth and characterization of 2D materials.

Education

  • 2016, Ph.D. Physics Departement, University of Crete, Heraklion, Crete, Greece
  • 2009, M.Sc. Physics Departement, University of Crete, Heraklion, Crete, Greece
  • 2006, B.Sc. Physics Departement, University of Crete, Heraklion, Crete, Greece

Career

  • 2017 - 2018, Postdoctoral researcher at Nanoscience Research Laboratory and Chemical Sensor Laboratory, Faculty of Science, Chiang Mai University
  • 2017, Postdoctoral researcher at Research School of Physics and Engineering, Australian National University
  • 2016 - 2017, Postdoctoral researcher on “Smart electrochromic windows for energy saving applications”, TEI of Crete

Interests

  • Nanomaterials
  • Metal oxides, chromic coatings, smart windows
  • Chemical vapor deposition, pulsed laser deposition
Office Phone: (+30) 2810 391420
Lab Phone: (+30) 2810 391321
Fax: G091
Email: mikeloul(AT)iesl.forth.gr
Mr. Loulakis Michael
Office Phone: (+30) 2810 391373
Lab Phone: (+30) 2810 391311
Fax: B108-3
Email: fanisk@iesl.forth.gr
Full CV: Download
Dr. Krasanakis Fanourios

Education

  • 2015, PhD, Chemistry Department, University of Crete, Greece
  • 2008, MSc, Chemistry Department, University of Crete, Greece
  • 2006, BSc, Materials Science and Technology, University of Crete, Greece

Career

  • 3/2019 – today, Post Doctoral Researcher, Hybrid Nanostructures Group, FORTH – IESL, Greece
  • 2016 – 2019, Research and Development Manager, Natural Cosmetics and Natural Oil Products Light Industries, Rethimno, Greece
  • 2010, Production Manager, Plastic Packaging Products Light Industry, Heraklion, Greece

Interests

  • Synthesis and characterization of organic – inorganic hybrid materials
  • Polymer surfaces and interfaces
  • Responsive polymer systems
  • Synthesis and characterization of novel polymers of various architectures
Office Phone: (+30) 2810 391386
Lab Phone: (+30) 2810 391321
Fax: G091
Email: tasoskoul(AT)iesl.forth.gr
Webpage: http://unis.iesl.forth.gr/team/team.htm
Dr. Koulouklidis Anastasios

Pages