Publications

2018

Camposeo, A., Persano, L., Farsari, M. & Pisignano, D. Additive Manufacturing: Applications and Directions in Photonics and Optoelectronics. Advanced Optical Materials 0, 1800419, doi:doi:10.1002/adom.201800419.

 Tasior, M. et al. The role of intramolecular charge transfer and symmetry breaking in the photophysics of pyrrolo [3, 2-b] pyrrole-dione. Physical Chemistry Chemical Physics 20, 22260-22271 (2018).

 Spanos, I., Selimis, A. & Farsari, M. 3D magnetic microstructures. Procedia CIRP 74, 349-352, doi:https://doi.org/10.1016/j.procir.2018.08.139 (2018).

 Manousidaki, M., Fedorov, V. Y., Papazoglou, D. G., Farsari, M. & Tzortzakis, S. Ring-Airy beams at the wavelength limit. Optics Letters 43, 1063-1066, doi:10.1364/ol.43.001063 (2018).

 Seniutinas, G. et al. Beyond 100 nm resolution in 3D laser lithography - Post processing solutions. Microelectronic Engineering 191, 25-31, doi:10.1016/j.mee.2018.01.018 (2018).


2017

I. Sakellari, X. Yin, M.L. Nesterov, K. Terzaki, A. Xomalis, M. Farsari, 3D Chiral Plasmonic Metamaterials Fabricated by Direct Laser Writing: The Twisted Omega Particle, Advanced Optical Materials 5(16) (2017) 1700200.

A.N. Giakoumaki, G. Kenanakis, A. Klini, M. Androulidaki, Z. Viskadourakis, M. Farsari, A. Selimis, 3D patterning of ZnO nanostructures, Materials Today  (2017) https://doi.org/10.1016/j.mattod.2017.07.003.

A.N. Giakoumaki, G. Kenanakis, A. Klini, M. Androulidaki, Z. Viskadourakis, M. Farsari, A. Selimis, 3D micro-structured arrays of ZnΟ nanorods, Scientific Reports 7(1) (2017) 2100.

M. Chatzinikolaidou, C. Pontikoglou, K. Terzaki, M. Kaliva, A. Kalyva, E. Papadaki, M. Vamvakaki, M Farsari, Recombinant human bone morphogenetic protein 2 (rhBMP-2) immobilized on laser-fabricated 3D scaffolds enhance osteogenesis. Colloids and Surfaces B: Biointerfaces 2017, 149, 233-242.

2016

V. Melissinaki, I. Konidakis, M. Farsari, S. Pissadakis, Fiber Endface Fabry–Perot Microsensor With Distinct Response to Vapors of Different Chlorinated Organic Solvents. IEEE Sensors Journal 2016, 16, 7094-7100.

M. Manousidaki, D.G. Papazoglou, M. Farsari, S. Tzortzakis, Abruptly autofocusing beams enable advanced multiscale photo-polymerization, Optica 3(5) (2016) 525-530.

A.I. Aristov, M. Manousidaki, A. Danilov, K. Terzaki, C. Fotakis, M. Farsari, A.V. Kabashin, 3D plasmonic crystal metamaterials for ultra-sensitive biosensing, Scientific Reports 6 (2016) 25380.

 R. Nazir, B Thorsted, E. Balčiūnas, L. Mazur, I. Deperasińska, M. Samoć, J. Brewer, M. Farsari,D.T. Gryko, π-Expanded 1, 3-diketones–synthesis, optical properties and application in two-photon polymerization. J.Mater.Chem.C,  4 (2016) 167-177.

2015

M. Palma, J.G. Hardy, G Tadayyon, M. Farsari, S.J. Wind, M.J. Biggs, Advances in functional assemblies for regenerative medicine, Adv.Health.Mater. 4 (2015) 2500-2519

P. Danilevicius, R.A. Rezende, F.D.A.S. Pereira, A. Selimis, V. Kasyanov, P.Y. Noritomi, da J.V.L. da Silva, M. Chatzinikolaidou, M. Farsari, V. Mironov, Burr-like, laser-made 3D microscaffolds for tissue spheroid encagement. Biointerphases. 2015;10(2):021011. doi: doi:http://dx.doi.org/10.1116/1.4922646.

ACS Editors’ Choice-Nazir, R.; Balčiu̅nas, E.; Buczyńska, D.; Bourquard, F.; Kowalska, D.; Gray, D.; Maćkowski, S.; Farsari, M.; Gryko, D. T., Donor–Acceptor Type Thioxanthones: Synthesis, Optical Properties, and Two-Photon Induced Polymerization. Macromolecules 2015, 48 (8), 2466-2472.

G. KenanakisA. Xomalis, A. SelimisM. Vamvakaki , M. Farsari , M. Kafesaki , C.M. Soukoulis, E.N. Economou. A three-dimensional infra-red metamaterial with asymmetric transmission. ACS Photonics 2015 2 (2), 287-294

V. Melissinaki, M. Farsari, S. Pissadakis, A fiber-endface, Fabry-Perot vapor microsensor fabricated by multiphoton polymerization, IEEE Journal of Topics in Quantum Electronics, DOI:10.1109/JSTQE.2014.2381463

 M. Chatzinikolaidou, S. Rekstyte, P. Danilevicius, C. Pontikoglou, H. Papadaki, M. Farsari, M. Vamvakaki, Adhesion and growth of human bone marrow mesenchymal stem cells on precise-geometry 3D organic–inorganic composite scaffolds for bone repair, Materials Science and Engineering: C, 48 (2015) 301-309.

A. Selimis, V. Mironov, M. Farsari, Direct laser writing: Principles and materials for scaffold 3D printing, Microelectronic Engineering, 132 (2015) 83-89.

P. Danilevicius, L. Georgiadi, C.J. Pateman, F. Claeyssens, M. Chatzinikolaidou, M. Farsari, The effect of porosity on cell ingrowth into accurately defined, laser-made, polylactide-based 3D scaffolds, Applied Surface Science, 336 (2015) 2-10.

R. Nazir, F. Bourquard, E. Balčiūnas, S. Smoleń, D. Gray, N.V. Tkachenko, M. Farsari, D.T. Gryko, π-Expanded α,β-Unsaturated Ketones: Synthesis, Optical Properties, and Two-Photon-Induced Polymerization, ChemPhysChem,  10.1002/cphc.201402646.


2014

M. Farsari, A. Selimis, Micro/Nano Lithography High-resolution 3D prototyping, SPIE Newsroom, (2014) 10.1117/1112.1201410.1005651.

R. Nazir, P. Danilevicius, A.I. Ciuciu, M. Chatzinikolaidou, D. Gray, L. Flamigni, M. Farsari, D.T. Gryko, π-Expanded Ketocoumarins as Efficient, Biocompatible Initiators for Two-Photon-Induced Polymerization, Chemistry of Materials, 26 (2014) 3175-3184.

S. Galanopoulos, N. Chatzidai, V. Melissinaki, A. Selimis, C. Schizas, M. Farsari, D. Karalekas, Design, Fabrication and Computational Characterization of a 3D Micro-Valve Built by Multi-Photon Polymerization, Micromachines, 5 (2014) doi:10.3390/mi5030505.

G.S. Sokolovskii, V. Melissinaki, V.V. Dudelev, S.N. Losev, K.K. Soboleva, E.D. Kolykhalova, A.G. Deryagin, V.I. Kuchinskii, E.A. Viktorov, M. Farsari, W. Sibbett, E.U. Rafailov, Superfocusing of high-M2 semiconductor laser beams: experimental demonstration, Proc. SPIE 9134 (2014) doi:10.1117/1112.2052483.

A. Žukauskas, V. Melissinaki, D. Kaškelyte, M. Farsari, M. Malinauskas, Improvement of the Fabrication Accuracy of Fiber Tip Microoptical Components via Mode Field Expansion, JLMN  [DOI: 10.2961/jlmn.2014.01.0014]

2013

K. Terzaki; M. Kissamitaki; A. Skarmoutsou; C. Fotakis; C. A. Charitidis; M. Farsari; M. Vamvakaki; M. Chatzinikolaidou, Pre-osteoblastic cell response on three-dimensional, organic-inorganic hybrid material scaffolds for bone tissue engineering. J. Biomed. Mater. Res. Part A 2013, 101A (8), 2283-2294.

K. Terzaki; E. Kalloudi; E. Mossou; E. P. Mitchell; V. T. Forsyth; E. Rosseeva; P. Simon; M. Vamvakaki; M. Chatzinikolaidou; A. Mitraki; M. Farsari, Mineralized self-assembled peptides on 3d laser-made scaffolds: A new route toward 'scaffold on scaffold' hard tissue engineering. Biofabrication 2013, 5 (4), 045002.

A. Skarmoutsou; G. Lolas; C. A. Charitidis; M. Chatzinikolaidou; M. Vamvakaki; M. Farsari, Nanomechanical properties of hybrid coatings for bone tissue engineering. J. Mech. Behav. Biomed. Mater. 2013, 25, 48-62.

R. Nazir; P. Danilevicius; D. Gray; M. Farsari; D. T. Gryko, Push–pull acylo-phosphine oxides for two-photon-induced polymerization. Macromolecules 2013, 46 (18), 7239-7244.

M. Malinauskas; M. Farsari; A. Piskarskas; S. Juodkazis, Ultrafast laser nanostructuring of photopolymers: A decade of advances. Phys. Rep.-Rev. Sec. Phys. Lett. 2013, 533 (1), 1-31.

E. Kabouraki; A. N. Giakoumaki; P. Danilevicius; D. Gray; M. Vamvakaki; M. Farsari, Redox multiphoton polymerization for 3d nanofabrication. Nano Lett. 2013, 13 (8), 3831-3835.

2012

N. Vasilantonakis; K. Terzaki; I. Sakellari; V. Purlys; D. Gray; C. M. Soukoulis; M. Vamvakaki; M. Kafesaki; M. Farsari, Three-dimensional metallic photonic crystals with optical bandgaps. Adv. Mater. 2012, 24 (8), 1101-1105.

I. Sakellari; E. Kabouraki; D. Gray; V. Purlys; C. Fotakis; A. Pikulin; N. Bityurin; M. Vamvakaki; M. Farsari, Diffusion-assisted high-resolution direct femtosecond laser writing. ACS Nano 2012, 6 (3), 2302-2311.

M. Oubaha; A. Kavanagh; A. Gorin; G. Bickauskaite; R. Byrne; M. Farsari; R. Winfield; D. Diamond; C. McDonagh; R. Copperwhite, Graphene-doped photo-patternable ionogels: Tuning of conductivity and mechanical stability of 3d microstructures. J. Mater. Chem. 2012, 22 (21), 10552-10559.

B. Mills; D. Kundys; M. Farsari; S. Mailis; R. W. Eason, Single-pulse multiphoton fabrication of high aspect ratio structures with sub-micron features using vortex beams. Appl. Phys. A-Mater. Sci. Process. 2012, 108 (3), 651-655.

M. Malinauskas; A. Zukauskas; V. Purlys; A. Gaidukeviciute; Z. Balevicius; A. Piskarskas; C. Fotakis; S. Pissadakis; D. Gray; R. Gadonas; M. Vamvakaki; M. Farsari, 3d microoptical elements formed in a photostructurable germanium silicate by direct laser writing. Opt. Lasers Eng. 2012, 50 (12), 1785-1788.

2011

S. Turunen; E. Kapyla; K. Terzaki; J. Viitanen; C. Fotakis; M. Kellomaki; M. Farsari, Pico- and femtosecond laser-induced crosslinking of protein microstructures: Evaluation of processability and bioactivity. Biofabrication 2011, 3 (4), 045002.

K. Terzaki; N. Vasilantonakis; A. Gaidukeviciute; C. Reinhardt; C. Fotakis; M. Vamvakaki; M. Farsari, 3D conducting nanostructures fabricated using direct laser writing. Opt. Mater. Express 2011, 1 (4), 586-597.

V. Melissinaki; A. A. Gill; I. Ortega; M. Vamvakaki; A. Ranella; J. W. Haycock; C. Fotakis; M. Farsari; F. Claeyssens, Direct laser writing of 3D scaffolds for neural tissue engineering applications. Biofabrication 2011, 3 (4), 045005.

2010

C. Schizas; V. Melissinaki; A. Gaidukeviciute; C. Reinhardt; C. Ohrt; V. Dedoussis; B. N. Chichkov; C. Fotakis; M. Farsari; D. Karalekas, On the design and fabrication by two-photon polymerization of a readily assembled micro-valve. Int. J. Adv. Manuf. Technol. 2010, 48 (5-8), 435-441.

I. Sakellari; A. Gaidukeviciute; A. Giakoumaki; D. Gray; C. Fotakis; M. Farsari; M. Vamvakaki; C. Reinhardt; A. Ovsianikov; B. N. Chichkov, Two-photon polymerization of titanium-containing sol-gel composites for three-dimensional structure fabrication. Appl. Phys. A-Mater. Sci. Process. 2010, 100 (2), 359-364.

M. Malinauskas; A. Zukauskas; V. Purlys; K. Belazaras; A. Momot; D. Paipulas; R. Gadonas; A. Piskarskas; H. Gilbergs; A. Gaidukeviciute; I. Sakellari; M. Farsari; S. Juodkazis, Femtosecond laser polymerization of hybrid/integrated micro-optical elements and their characterization. J. Opt. 2010, 12 (12), 124010.

M. Farsari; M. Vamvakaki; B. N. Chichkov, Multiphoton polymerization of hybrid materials. J. Opt. 2010, 12 (12), 124001.

2009

E. Stratakis; A. Ranella; M. Farsari; C. Fotakis, Laser-based micro/nanoengineering for biological applications. Prog. Quantum Electron. 2009, 33 (5), 127-163.

A. Ovsianikov; S. Z. Xiao; M. Farsari; M. Vamvakaki; C. Fotakis; B. N. Chichkov, Shrinkage of microstructures produced by two-photon polymerization of zr-based hybrid photosensitive materials. Opt. Express 2009, 17 (4), 2143-2148.

M. Farsari; B. N. Chichkov, Two-photon fabrication. Nat. Photonics 2009, 3 (8), 450-452.

V. Dinca; J. Catherine; A. Mourka; S. Georgiou; M. Farsari; C. Fotakis, 2d and 3d biotin patterning by ultrafast lasers. Int. J. Nanotechnol. 2009, 6 (1-2), 88-98.

F. Claeyssens; E. A. Hasan; A. Gaidukeviciute; D. S. Achilleos; A. Ranella; C. Reinhardt; A. Ovsianikov; S. Xiao; C. Fotakis; M. Vamvakaki; B. N. Chichkov; M. Farsari, Three-dimensional biodegradable structures fabricated by two-photon polymerization. Langmuir 2009, 25 (5), 3219-3223.

2008

A. Ovsianikov; J. Viertl; B. Chichkov; M. Oubaha; B. MacCraith; I. Sakellari; A. Giakoumaki; D. Gray; M. Vamvakaki; M. Farsari; C. Fotakis, Ultra-low shrinkage hybrid photosensitive material for two-photon polymerization microfabrication. ACS Nano 2008, 2 (11), 2257-2262.

M. Farsari; A. Ovsianikov; M. Vamvakaki; I. Sakellari; D. Gray; B. N. Chichkov; C. Fotakis, Fabrication of three-dimensional photonic crystal structures containing an active nonlinear optical chromophore. Appl. Phys. A-Mater. Sci. Process. 2008, 93 (1), 11-15.

V. Dinca; A. Ranella; M. Farsari; D. Kafetzopoulos; M. Dinescu; A. Popescu; C. Fotakis, Quantification of the activity of biomolecules in microarrays obtained by direct laser transfer. Biomed. Microdevices 2008, 10 (5), 719-725.

V. Dinca; E. Kasotakis; J. Catherine; A. Mourka; A. Ranella; A. Ovsianikov; B. N. Chichkov; M. Farsari; A. Mitraki; C. Fotakis, Directed three-dimensional patterning of self-assembled peptide fibrils. Nano Lett. 2008, 8 (2), 538-543.

V. Dinca; M. Farsari; D. Kafetzopoulos; A. Popescu; M. Dinescu; C. Fotakis, Patterning parameters for biomolecules microarrays constructed with nanosecond and femtosecond uv lasers. Thin Solid Films 2008, 516 (18), 6504-6511.

S. H. Anastasiadis; M. I. Lygeraki; A. Athanassiou; M. Farsari; D. Pisignano, Reversibly photo-responsive polymer surfaces for controlled wettability. J. Adhes. Sci. Technol. 2008, 22 (15), 1853-1868.

2007

M. Farsari; G. Filippidis; T. S. Drakakis; K. Sambani; S. Georgiou; G. Papadakis; E. Gizeli; C. Fotakis, Three-dimensional biomolecule patterning. Appl. Surf. Sci. 2007, 253 (19), 8115-8118.

V. Dinca; A. Ranella; A. Popescu; M. Dinescu; M. Farsari; C. Fotakis, Parameters optimization for biological molecules patterning using 248-nm ultrafast lasers. Appl. Surf. Sci. 2007, 254 (4), 1164-1168.

V. Dinca; E. Kasotakis; J. Catherine; A. Mourka; A. Mitraki; A. Popescu; M. Dinescu; M. Farsari; C. Fotakis, Development of peptide-based patterns by laser transfer. Appl. Surf. Sci. 2007, 254 (4), 1160-1163.

2006

S. Zoppel; M. Farsari; R. Merz; J. Zehetner; G. Stangl; G. A. Reider; C. Fotakis, Laser micro machining of 3c-sic single crystals. Microelectron. Eng. 2006, 83 (4-9), 1400-1402.

E. Mele; D. Pisignano; M. Varda; M. Farsari; G. Filippidis; C. Fotakis; A. Athanassiou; R. Cingolani, Smart photochromic gratings with switchable wettability realized by green-light interferometry. Appl. Phys. Lett. 2006, 88 (20), 203124.

M. Farsari; G. Filippidis; K. Sambani; T. S. Drakakis; C. Fotakis, Two-photon polymerization of an eosin y-sensitized acrylate composite. J. Photochem. Photobiol. A-Chem. 2006, 181 (1), 132-135.

T. S. Drakakis; G. Papadakis; K. Sambani; G. Filippidis; S. Georgiou; E. Gizeli; C. Fotakis; M. Farsari, Construction of three-dimensional biomolecule structures employing femtosecond lasers. Appl. Phys. Lett. 2006, 89 (14), 144108.

A. Athanassiou; M. Varda; E. Mele; M. I. Lygeraki; D. Pisignano; M. Farsari; C. Fotakis; R. Cingolani; S. H. Anastasiadis, Combination of microstructuring and laser-light irradiation for the reversible wettability of photosensitised polymer surfaces. Appl. Phys. A-Mater. Sci. Process. 2006, 83 (3), 351-356.

2005

S. Zoppel; D. Gray; M. Farsari; R. Merz; G. A. Reider; C. Fotakis, Elimination of cracking during uv laser ablation of srtio3 single crystals by employing a femtosecond laser. Appl. Surf. Sci. 2005, 252 (5), 1910-1914.

M. Farsari; G. Filippidis; S. Zoppel; G. A. Reider; C. Fotakis, Efficient femtosecond laser micromachining of bulk 3c-sic. J. Micromech. Microeng. 2005, 15 (9), 1786-1789.

M. Farsari; G. Filippidis; C. Fotakis, Fabrication of three-dimensional structures by three-photon polymerization. Opt. Lett. 2005, 30 (23), 3180-3182.

2000

M. Farsari; F. Claret-Tournier; S. Huang; C. R. Chatwin; D. M. Budgett; P. M. Birch; R. C. D. Young; J. D. Richardson, A novel high-accuracy microstereolithography method employing an adaptive electro-optic mask. J. Mater. Process. Technol. 2000, 107 (1-3), 167-172.

P. Birch; R. Young; M. Farsari; C. Chatwin; D. Budgett, A comparison of the iterative fourier transform method and evolutionary algorithms for the design of diffractive optical elements. Opt. Lasers Eng. 2000, 33 (6), 439-448.

P. Birch; R. Young; C. Chatwin; M. Farsari; D. Budgett; J. Richardson, Fully complex optical modulation with an analogue ferroelectric liquid crystal spatial light modulator. Opt. Commun. 2000, 175 (4-6), 347-352.

1999

M. Farsari; S. Huang; R. C. D. Young; M. I. Heywood; C. D. Bradfield; C. R. Chatwin, Holographic cure monitoring of the dupont somos (tm) 7100 stereolithography resin. Opt. Lasers Eng. 1999, 31 (3), 239-246.

M. Farsari; S. Huang; P. Birch; F. Claret-Tournier; R. Young; D. Budgett; C. Bradfield; C. Chatwin, Microfabrication by use of a spatial light modulator in the ultraviolet: Experimental results. Opt. Lett. 1999, 24 (8), 549-550.

C. R. Chatwin; M. Farsari; S. Huang; M. I. Heywood; R. C. D. Young; P. M. Birch; F. Claret-Tournier; J. D. Richardson, Characterisation of epoxy resins for microstereolithographic rapid prototyping. Int. J. Adv. Manuf. Technol. 1999, 15 (4), 281-286.

D. M. Budgett; M. I. Heywood; R. C. D. Young; C. R. Chatwin; S. Huang; P. Birch; M. Farsari; C. D. Bradfield, Real-time digital-optical correlator-systems design. Microprocess. Microsyst. 1999, 23 (8-9), 501-511.

1998

S. Huang; M. I. Heywood; R. C. D. Young; M. Farsari; C. R. Chatwin, Systems control for a micro-stereolithography prototype. Microprocess. Microsyst. 1998, 22 (2), 67-77.

M. Farsari; S. P. Huang; R. C. D. Young; M. I. Heywood; P. J. B. Morrell; C. R. Chatwin, Holographic characterization of epoxy resins at 351.1 nm. Opt. Eng. 1998, 37 (10), 2754-2759.

M. Farsari; S. Huang; R. C. D. Young; M. I. Heywood; P. J. B. Morrell; C. R. Chatwin, Four-wave mixing studies of uv curable resins for microstereolithography. J. Photochem. Photobiol. A-Chem. 1998, 115 (1), 81-87.

C. Chatwin; M. Farsari; S. P. Huang; M. Heywood; P. Birch; R. Young; J. Richardson, Uv microstereolithography system that uses spatial light modulator technology. Appl. Optics 1998, 37 (32), 7514-7522.

1997

Cole, J. C., J. M. Cole, et al. (1997). "Structural studies of a series of organic non-linear optical materials." Acta Crystallographica Section B-Structural Science 53: 812-821.


   © Maria Farsari 2018